Warning: Refer to Brake Dust Warning in the Preface section.

1. Block the rear drive wheels.
2. Release the electronic park brake cable tension, if equipped. Refer to Parking Brake Cable Adjuster Disabling.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.
5. Remove the rear wheel bearing and hub assembly. Refer to Rear Wheel Bearing and Hub Replacement.
6. Remove the parking brake actuator. Refer to Parking Brake Actuator Replacement.



7. Remove the parking brake cable bracket nuts (1).



8. Remove the parking brake backing plate (1).

1. Install the parking brake backing plate (1).

Caution: Refer to Fastener Caution in the Preface section.




2. Install the parking brake cable bracket nuts (1) and tighten to   60 N·m (44 lb ft).



3. Install the parking brake actuator (1). Refer to Parking Brake Actuator Replacement.
4. Connect the park brake cable to the actuator.
5. Install the rear wheel bearing and hub assembly. Refer to Rear Wheel Bearing and Hub Replacement.
6. Install the parking brake shoes. Refer to Parking Brake Shoe Replacement.
7. Adjust the park brake. Refer to Parking Brake Adjustment.
8. Set the electric park brake cable tension. Refer to Parking Brake Cable Adjuster Enabling
9. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation.