GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2003 🢒 CTS - RHD 🢒 Body and Accessories 🢒 Bumpers 🢒 Rear Bumper Bracket Replacement

Removal Procedure
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .

    2. Object Number: 707977 Size: SH
  2. Remove the bolts (2) securing the bumper bracket (3) to the quarter panel (1).
  3. Remove the rear bumper bracket (3).

Installation Procedure

    Object Number: 707977 Size: SH
  1. Verify that the plastic retainers (4) are secure to the quarter panel.
  2. Install the bumper bracket (3) to the quarter panel (1).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts (2) to secure the bumper bracket (3) to the quarter panel.

    4. Tighten
    Tighten the bumper bracket bolts to 3 N·m (27 lb in).

  4. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .