Removal Procedure
- Remove the defroster valve actuator. Refer to
Defroster Valve Actuator Replacement
.
- Disconnect the mode valve (floor) actuator connector.
Important: The actuator linkage may need to be rotated in order to access the screws
for the following step.
- Remove the actuator screws.
- Remove the actuator from the linkage.
- Remove the actuator from the vehicle.
Installation Procedure
- Install the actuator in the vehicle.
- Install the actuator to the linkage.
Important: The actuator linkage may need to be rotated in order to access the screw
holes for the following step.
- Install the actuator screws until fully seated and not stripped.
- Connect the actuator connector.
- Install the defroster valve actuator. Refer to
Defroster Valve Actuator Replacement
.