Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Place the window in the full up position.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door inner belt sealing strip. Refer to Rear Side Door Window Inner Sealing Strip Replacement .
4. Remove the rear door window garnish molding. Refer to Rear Door Opening Frame Garnish Molding Replacement .
5. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
6. Remove the rear door window regulator. Refer to Rear Side Door Window Regulator Replacement .
7. Remove the rear door window. Refer to Rear Side Door Window Replacement .
8. Remove the rear door stationary window division channel. Refer to Rear Side Door Stationary Window and Front Channel Replacement .

1

Screw, Rear Door Window Reveal Molding (Qty: 7)

Tighten
1.3 N·m (12 lb in)

2

Reveal Molding, Rear Door Window Reveal

Tip

1. Use a plastic flat-bladed tool to release the reveal molding retainers from the front of the door window frame.
2. Pull the reveal molding from the window frame.