Callout
| Component Name
|
|
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications:
Refer to
Fastener Tightening Specifications .
Preliminary Procedure
- Recover the refrigerant from the air conditioning (A/C) system. Refer to
Refrigerant Recovery and Recharging .
- Remove the drive belt. Refer to
Drive Belt Replacement .
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle .
- Remove the right front tire. Refer to
Tire and Wheel Removal and Installation .
- Remove the front air deflector. Refer to
Front Air Deflector Replacement .
- Remove the washer solvent container. Refer to
Windshield Washer Solvent Container Replacement .
- Remove the brake line retaining clips from the engine frame in order to allow the brake lines to move during removal of the A/C compressor.
Important: Seal the compressor suction and discharge ports after the hoses are removed in order to keep contaminants from entering the compressor and oil from draining out of the compressor during removal.
- Disconnect the A/C compressor electrical connector.
|
1
| A/C Compressor Suction Hose Retaining Nut
Tighten
16 N·m (12 lb ft) |
2
| Sealing Washer
Tip
Remove and discard the sealing washer. Refer to
Sealing Washer Replacement . |
3
| A/C Compressor Discharge Hose Retaining Nut
Tighten
16 N·m (12 lb ft) |
4
| Sealing Washer
Tip
Remove and discard the sealing washer. Refer to
Sealing Washer Replacement . |
5
| A/C Compressor Retaining Nut
Tighten
25 N·m (18 lb ft) |
6
| A/C Compressor Front Retaining Bolt
Tighten
25 N·m (18 lb ft) |
7
| A/C Compressor Rear Retaining Bolt
Tighten
25 N·m (18 lb ft) |
8
| A/C Compressor Retaining Stud
Tighten
25 N·m (18 lb ft) |
9
| A/C Compressor
|
