GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .

  2. Object Number: 511227  Size: SH
  3. Remove the three fasteners attaching the inside door handle to the door trim panel.
  4. Remove the inside door handle from the door trim panel.

Installation Procedure


    Object Number: 511227  Size: SH
  1. Position the inside door handle through the door trim panel.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the 3 inside door handle fasteners.
  4. Tighten
    Tighten the three fasteners to 2 N·m (18 lb in).

  5. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .