Removal Procedure
- Remove the radio. Refer to
Radio Replacement
.
- For DTS vehicles equipped with a center console, remove the left console trim panel. Refer to
Front Floor Console Side Trim Panel Replacement - Left Side
in Instrument Panel, Gages and Console.
- For base DeVille and DHS, remove the instrument panel (IP) center compartment . Refer to
Instrument Panel Compartment Replacement
in Instrument Panel, Gages and Console.
- Cut off the radio end of the radio extension cable.
- Disconnect the radio antenna extension cable.
- Disengage the extension cable clip from the instrument panel carrier.
Important: Note the routing of the antenna extension cable through the instrument panel carrier before removal.
- Pull the radio antenna extension cable (1) from the instrument panel (I/P) harness.
Installation Procedure
- Route the radio antenna extension cable (1) next to the I/P harness, through the I/P carrier to the radio opening, as noted during removal.
- Connect the antenna extension cable (1).
- Tie strap the antenna extension cable (1) to the IP harness.
- Install the radio. Refer to
Radio Replacement
.
- For DTS vehicles equipped with a center console, Install the left console trim panel. Refer to
Front Floor Console Side Trim Panel Replacement - Left Side
in Instrument Panel, Gages and Console.
- For base DeVille and DHS, Install the instrument panel (IP) center compartment . Refer to
Instrument Panel Compartment Replacement
in Instrument Panel, Gages and Console.