GM Service Manual Online
For 1990-2009 cars only

Radio Front Side Door Lower Speaker Replacement Door

Removal Procedure

  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.

  2. Object Number: 337217  Size: SH
  3. Disconnect the electrical connector from the speaker.
  4. Remove the 4 fasteners from the speaker.
  5. Remove the speaker from the door.
  6. Note the orientation of the speaker electrical connector.

Installation Procedure

  1. Connect the electrical connector to the speaker.

  2. Object Number: 337217  Size: SH
  3. Install the speaker to the door with the electrical connector oriented as noted during removal.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the 4 fasteners.
  6. Tighten
    Tighten the 4 speaker fasteners to 2.5 N·m (22 lb in).

  7. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement in Doors.