Removal Procedure
- Remove the steering wheel. Refer to
Steering Wheel Replacement
.
- Remove the steering wheel rear shroud screws (1).
- Remove the 2 retaining screws (1).
Installation Procedure
- Install the module to the steering wheel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 retaining screws (1).
Tighten
Tighten the retaining screws to 5 N·m
(44 lb in).
- Install the rear shroud of the steering
wheel.
Tighten
Tighten the retaining screws (1) to 4.5 N·m
(40 lb in).
- Install the steering wheel. Refer to
Steering Wheel Replacement
.