GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

DEFINITION: The lock system will not allow the key to be turned to the OFF lock position.

1

Did you review the Steering Wheel and Column System Description?

Go to Step 2

Go to Steering Wheel and Column Description and Operation

2

Verify that the lock system does not lock.

Does the lock system operate normally?

System OK

Go to Step 3

3

Inspect for an incorrect, worn, or damaged key.

Is the key incorrect, worn, or damaged?

Go to Step 9

Go to Step 4

4

Inspect for a faulty lock cylinder or release button.

Is the lock cylinder or release button damaged?

Go to Step 10

Go to Step 5

5

Inspect the shift cable adjustment.

Is the shift cable adjusted incorrectly?

Go to Step 11

Go to Step 6

6

Inspect the automatic transmission (A/T) shift control for damage.

Is the A/T shift control damaged?

Go to Step 12

Go to Step 7

7

Inspect the ignition switch for damage.

Is the ignition switch damaged?

Go to Step 13

Go to Step 8

8

Inspect the steering wheel theft deterrent lock for damage.

Is the lock damaged?

Go to Step 14

Go to Step 3

9

Replace the key. Refer to Key and Lock Cylinder Coding in General Information.

Did you complete the repair?

Go to Step 15

--

10

Replace the lock cylinder. Refer to Ignition Lock Cylinder Replacement .

Did you complete the repair?

Go to Step 15

--

11

Adjust the shift cable. Refer to Range Selector Lever Cable Adjustment in Automatic Transaxle-4T80-E.

Did you complete the repair?

Go to Step 15

--

12

Replace the A/T shift control. Refer to Transmission Control Replacement in Automatic Transaxle-4T80-E.

Did you complete the repair?

Go to Step 15

--

13

Replace the ignition switch. Refer to Ignition and Start Switch Replacement .

Did you complete the repair?

Go to Step 15

--

14

Replace the steering wheel theft deterrent lock. Refer to Theft Deterrent Module Replacement .

Did you complete the repair?

Go to Step 15

--

15

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3