GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Eldorado 🢒 Restraints 🢒 Seat Belts 🢒 Rear Seat Belt Retractor Replacement

Removal Procedure

    Object Number: 161044 Size: MH
  1. Remove the quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
  2. Remove the lower anchor bolt.
  3. Remove the retaining guide loop and bolts.
  4. Remove the retractor anchor bolts.
  5. Remove the belt assembly from the vehicle.

Installation Procedure

    Object Number: 161044 Size: MH
  1. Install the belt assembly to the vehicle.
  2. Ensure the belt assembly is not twisted.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the retractor anchor bolts.

    4. Tighten
    Tighten the bolts to 41 N·m (30 lb ft).

  4. Install the belt guide loop and bolts.

    5. Tighten
    Tighten the bolts to 41 N·m (30 lb ft).

  5. Install the quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.