Removal Procedure
- Remove the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Disconnect the electrical
connector.
- Depress the locking tabs in order to remove the remote control
door lock receiver (1) from the electronics bay board.
- Remove the remote control door lock receiver.
Installation Procedure
- Connect the electrical connector to the remote control door lock
receiver.
- Snap the remote control door lock receiver (1) onto the
electronics bay board.
- Ensure the
locking tabs are secure.
- Install the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Reprogram the transmitters. Refer to
Transmitter Programming
.