Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Disable the SIR system. Refer to
SIR Disabling and Enabling Zone 3
.
- Remove the steering column trim covers. Refer to
Steering Column Trim Covers Replacement.
- Remove the retaining screws from the multifunction switch.
- Disconnect the multifunction switch electrical connections.
- Remove the multifunction switch.
Installation Procedure
- Connect the multifunction switch electrical connectors.
- Install the multifunction switch to the steering column.
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining screws to the multifunction switch.
Tighten
Tighten the screw to 7 N·m (62 lb in).
- Install the steering column trim cover. Refer to
Steering Column Trim Covers Replacement.
- Enable the SIR. Refer to
SIR Disabling and Enabling Zone 3
.