Important: Finish the following steps before going to the Symptom Table:
• | No DTC is set. |
• | The control modules can communicate via the serial data link. |
• | Inspect for aftermarket devices which could affect the operation of the power sunroof system. Refer to Checking Aftermarket Accessories . |
• | Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom. |
Faulty electrical connections or wiring may be the cause intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:
• | Retained Accessory Power (RAP) On After Timeout , if the power sunroof should operate longer than the RAP time-out. |