GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SRX 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Theft Deterrent Vehicle Inclination Sensor Replacement

Removal Procedure
  1. Remove the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement .

    2. Object Number: 1283464 Size: SH
  2. Disconnect the electrical connector on the inclination sensor (1).
  3. Remove the inclination sensor from the bracket.

Installation Procedure

    Object Number: 1283464 Size: SH
  1. Install the inclination sensor (1) to the bracket.
  2. Connect the electrical connector.
  3. Install the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement .