Tools Required
• | J 8092
Universal Driver Handle |
Removal Procedure
- Remove the transmission torque converter. Refer to
Torque Converter Replacement
.
- Remove and discard the torque converter seal bolts.
- Remove the torque converter seal using
J 45000
.
Installation Procedure
- Assemble
J 8092
onto
J 44766
.
- Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.
Important: Align the torque converter seal with the bolt holes.
- Install the torque converter seal into the torque converter housing.
Notice: Refer to Fastener Notice in the Preface section.
- Install the torque converter seal bolts.
Tighten
Tighten the NEW torque converter seal bolts to 3.6 N·m (32 lb in).
- Install the transmission torque converter. Refer to
Torque Converter Replacement
.