Caution: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling . Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Disable the SIR. Refer to SIR Disabling and Enabling .
2. Remove the center console. Refer to Front Floor Console Replacement .

1

Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Inflatable Restraint Vehicle Rollover Sensor Assembly