Removal Procedure
Important: The side trim covers overlap. This procedure requires the removal of the front trim cover and 2 side trim covers on the same side.
- Remove the roof side trim covers from the side of the tracks in order to access the rear track screws being serviced. Refer to
Sunroof Exterior Trim Cover Replacement
.
- Remove the front, center, and rear sunroof window . Refer to
Sunroof Window Replacement
.
- Remove the rear track extension. Refer to
Sunroof Window Track Rear Extension Replacement
- Slide the sunroof window guide from the rear track .
- Remove the screws from sunroof rear track assembly.
- Lift the sunroof rear track from the sunroof frame.
Installation Procedure
- Position the sunroof rear track to the sunroof frame.
Notice: Refer to Fastener Notice in the Preface section.
Important: Loosely install the screws for the entire length of the tracks. Ensure that the track being serviced is parallel to the other track.
- Install the screws to sunroof rear track.
Tighten
Tighten the screws to 5 N·m (44 lb in).
- Slide the sunroof window guide into the rear track.
- Install the rear extension to the track. Refer to
Sunroof Window Track Rear Extension Replacement
- Install the rear, center, and front windows. Refer to
Sunroof Window Replacement
.
- Check sunroof window for proper operation.
- Install the sunroof exterior trim covers to the side of the track that was serviced. Refer to
Sunroof Exterior Trim Cover Replacement
.