Preliminary Procedures

1. Remove the body side trim panel. Refer to Body Side Rear Trim Panel Replacement .
2. Remove the liftgate close actuator motor control module. Refer to Liftgate Close Actuator Motor Control Module Replacement .
3. Remove the rear body control module, if required. Refer to Accessory and Liftgate Control Module Replacement .

1

Liftgate Close Actuator Bracket Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Liftgate Close Actuator Bracket Nut

Tighten
10 N·m (89 lb in)

3

Liftgate Close Actuator Bracket