GM Service Manual Online
For 1990-2009 cars only

Transmission Control Replacement Left Hand Drive


Object Number: 1828596  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Many automatic transmission shift control related complaints can be corrected with linkage adjustment. DO NOT replace a shifter assembly without first attempting to correct the condition with the linkage adjustment procedure.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Disconnect the shift linkage from the shift control. Refer to Shift Control Linkage Replacement.
  4. Lower the vehicle.
  5. Remove the shift control knob. Refer to Transmission Control Lever Knob Replacement.
  6. Remove the center console assembly. Refer to Front Floor Console Replacement.

1

Shift Control Nut (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Shift Control

Procedure

  1. Disconnect the electrical connector from the shift control.
  2. Adjust the shift control linkage after installing the shift control. Refer to Shift Control Linkage Adjustment.

Transmission Control Replacement Right Hand Drive


Object Number: 1849551  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Many automatic transmission shift control related complaints can be corrected with linkage adjustment. DO NOT replace a shifter assembly without first attempting to correct the condition with the linkage adjustment procedure.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Disconnect the shift linkage from the shift control. Refer to Shift Control Linkage Replacement.
  4. Lower the vehicle.
  5. Remove the shift control knob. Refer to Transmission Control Lever Knob Replacement.
  6. Remove the center console assembly. Refer to Front Floor Console Replacement.

1

Shift Control Nut (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
9 N·m (80 lb in)

2

Shift Control

Procedure

  1. Disconnect the electrical connector from the shift control.
  2. Adjust the shift control linkage after installing the shift control. Refer to Shift Control Linkage Adjustment.