GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Engine 🢒 Engine Electrical 🢒 Transfer Case Assembly Replacement

Removal Procedure
  1. Drain the transfer case fluid, if necessary. Refer to Transfer Case Fluid Replacement.
  2. Remove the exhaust system. Refer to Exhaust System Replacement.
  3. Remove the rear propeller shaft. Refer to Rear Propeller Shaft Replacement.

    4. Object Number: 830398 Size: SH
  4. Support the transmission with a suitable screw jack and a block of wood.
  5. Remove the transmission mount-to-body bolts.
  6. Using the jack, lower the transmission enough to access the transmission mount-to-transfer case mounting bolts.

    7. Object Number: 888315 Size: SH
  7. Remove the transmission mount-to-transmission case mounting bolts.
  8. Remove the transmission mount assembly from the vehicle.
  9. Remove the front propeller shaft. Refer to Front Propeller Shaft Replacement.

    10. Object Number: 830369 Size: SH

    Note: Do not remove the jack and block of wood from under the transmission.

  10. Using another suitable adjustable jack, support the transfer case.
  11. Remove the transfer case bolts.
  12. Remove the transfer case.

Installation Procedure

    Object Number: 830369 Size: SH
  1. Apply grease GM P/N 1051344 (Canadian P/N 993037), or equivalent, on the input splines starting from the front edge to 10 mm inward in a continuous pattern around the inside diameter (ID) of the splines to completely fill the splines.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the transfer case.
  3. Install the transfer case-to-transmission bolts.

    4. Tighten
    Tighten the case-to-transmission bolts to 60 N·m (44 lb ft).

  4. Remove the adjustable jack from the transfer case.

    5. Object Number: 901932 Size: SH
  5. Install the transmission mount assembly. Refer to Transmission Rear Mount Replacement.
  6. Remove the jack and block of wood from under the transmission.
  7. Install the front propeller shaft. Refer to Front Propeller Shaft Replacement.
  8. Install the rear propeller shaft. Refer to Rear Propeller Shaft Replacement.
  9. Install the exhaust system. Refer to Exhaust System Replacement.
  10. Refill the transfer case with fluid. Refer to Transfer Case Fluid Replacement.