GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Adjuster Replacement

Removal Procedure
  1. Remove the seat from the vehicle. Refer to Rear Seat Replacement.
  2. Remove the right seat cushion. Refer to Rear Seat Cushion Replacement - Right Side.
  3. Remove the left seat cushion. Refer to Rear Seat Cushion Replacement - Left Side.

    4. Object Number: 1273944 Size: SH
  4. Remove the pivot trim cover screws (1).
  5. Remove the outer pivot covers.
  6. Remove the right seat back. Refer to Rear Seat Number 1 Back Replacement - Right Side.
  7. Remove the left seat back. Refer to Rear Seat Number 1 Back Replacement - Left Side.

Installation Procedure
  1. Install the left seat back on to the seat adjuster. Refer to Rear Seat Number 1 Back Replacement - Left Side.
  2. Install the right seat back on to the adjuster. Refer to Rear Seat Number 1 Back Replacement - Right Side.

    3. Object Number: 1273944 Size: SH
  3. Install the inner pivot covers.
  4. Install the outer pivot covers.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the pivot cover screws (1).

    6. Tighten
    Tighten the pivot cover screws to 2 N·m (18 lb in).

  6. Install the right seat cushion. Refer to Rear Seat Cushion Replacement - Right Side.
  7. Install the left seat cushion. Refer to Rear Seat Cushion Replacement - Left Side.
  8. Install the seat into the vehicle. Refer to Rear Seat Replacement.