GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Rear Number 2 Folding Seat Replacement.
  2. Lay the seat down on the seat back.

  3. Object Number: 1260911  Size: SH
  4. Disconnect the J-channel retainers (1) from the sides of the seat cover.

  5. Object Number: 1260914  Size: SH
  6. Remove the seat cover (1) from the seat bottom.

  7. Object Number: 1260928  Size: SH
  8. Remove the recliner motor screws (1) from the seat frame.

  9. Object Number: 1261000  Size: SH
  10. Remove the screws from the horizontal motor (1).

  11. Object Number: 1261003  Size: SH
  12. Remove the seat frame bolts (1).
  13. Remove the seat frame.

Installation Procedure

  1. Place the seat frame onto the seat adjuster.
  2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1261003  Size: SH
  3. Install the seat frame retaining bolts (1).
  4. Tighten
    Tighten the bolts to 35 N·m (26 lb ft).


    Object Number: 1261000  Size: SH
  5. Install the horizontal motor (1).
  6. Tighten
    Tighten the horizontal motor screws to 10 N·m (88 lb in).


    Object Number: 1260928  Size: SH
  7. Install the recliner motor to the seat frame.
  8. Tighten
    Tighten the recliner motor screws (1) to 10 N·m (88 lb in).


    Object Number: 1260914  Size: SH
  9. Install the seat cover (1) on to the seat bottom.

  10. Object Number: 1260911  Size: SH
  11. Connect all J-channel retainers (1).
  12. Install the seat into the vehicle. Refer to Rear Number 2 Folding Seat Replacement.