Preliminary Procedures

1. Remove the front seat. Refer to Bucket Seat Replacement.
2. Remove the seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement.
3. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.

1

Seat Cushion Frame

Procedure

1. Pull up from the front and slide forward to remove the adjuster assembly.
2. Disconnect the electrical connectors and wiring from the seat cushion frame.
3. If replacing the frame, transfer the components as necessary.

2

Seat Back Frame Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
30 N·m (22 lb ft)

3

Front Seat Adjuster

Tip
Disconnect the electrical connectors.