Did you perform the brake warning diagnostic system check?

--

Go to Step 2

Go to Brake Warning System Check

1. Verify that the park brake is disengaged.
2. Turn on the ignition.

Is the PARK indicator illuminated?

--

Go to Brake Warning System Check

Go to Step 3

1. Disconnect the brake fluid level switch.
2. Measure the resistance between the brake fluid level indicator switch harness connector terminal A and ground.

Is the resistance less than the specified value?

5 ohms

Go to Step 4

Go to Step 6

1. Disconnect the instrument panel cluster (IPC) connectors.
2. Measure the resistance between the IPC connector C2 terminal B4 and ground.

Is the resistance less than the specified value?

5 ohms

Go to Step 5

Go to Step 7

Repair a short to ground in CKT 333 (PPL). Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Brake Warning System Check

--

Replace the brake fluid level sensor switch. Refer to Brake Fluid Level Indicator Switch Replacement .

Did you complete the repair?

--

Go to Brake Warning System Check

--

1. Perform the IPC diagnostic system check. Refer to Diagnostic System Check - Instrument Cluster in Instrument Panel, Gauges, and Console.
2. Replace the IPC if necessary. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges, and Console.

Did you complete the repair?

--

Go to Brake Warning System Check

--