Navigation System Display Inoperative 98
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire Navigation System Check performed? | -- | Go to Navigation System Check | |
2 |
Does the Navigation Display Module power up? | -- | ||
3 |
Did the test lamp light? | -- | ||
4 | Connect a test lamp between cavity 5 and cavity 6 of the Navigation Data Processor harness connector C1. Did the test lamp light? | -- | ||
5 | Repair the open in circuit 3240 between cavity 5 of the Navigation Data Processor connector C1 and Splice S304. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
6 | Connect a test lamp between cavity 5 and cavity 12 of the Navigation Data Processor harness connector C1. Did the test lamp light? | -- | ||
7 | Repair the open in circuit 1051 between cavity 6 of the Navigation Data Processor connector C1 and Ground G401. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
8 | Connect a test lamp between cavity 4 of the Navigation Data Processor harness connector C1 and ground. Did the test lamp light? | -- | ||
9 | Repair the open in circuit 1051 between cavity 12 of the Navigation Data Processor connector C1 and Ground G401. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
10 | Measure the voltage between cavity 15 of the Navigation Data Processor harness connector C1 and ground with a DMM. Was the voltage measured within the specified range? | 0 V | ||
11 | Repair the open in circuit 334 between cavity A7 of the Navigation Relay and cavity 4 of the Navigation Data Processor connector C1. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
12 | Measure the resistance between cavity 15 of the Navigation Data Processor harness connector C1 and ground with a DMM. Was the resistance measured within the specified range? | ∞ | ||
13 | Repair the short to B+ in circuit 2045 between cavity 15 of the Navigation Data Processor connector C2 and cavity of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
14 |
Was the resistance measured within the specified range? | 0-2 ohms | ||
15 | Repair the short to ground in circuit 2045 between cavity 15 of the Navigation Data Processor connector C2 and cavity of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
16 | Replace the Navigation Data Processor. Refer to Navigation Data Processor Replacement in Body Rear End. Is the replacement complete? | -- | Go to Navigation System Check | -- |
17 | Repair the open in circuit 2045 between cavity 15 of the Navigation Data Processor connector C2 and cavity of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
18 |
Did the test lamp light? | -- | ||
19 | Connect a test lamp between cavity 10 of the Navigation Display Module harness connector C3 and ground. Did the test lamp light? | -- | ||
20 |
Did the test lamp light? | -- | ||
21 | Connect a test lamp between cavity 1 and cavity 10 of the Navigation Display Module harness connector C3. Did the test lamp light? | -- | ||
22 | Repair the open in circuit 3240 between cavity 10 of the Navigation Display Module connector C1 and Splice S304. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
23 |
Did the test lamp light? | -- | ||
24 | Repair the open in circuit 3240 between cavity B9 of the Navigation Relay and Splice S304. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
25 | Replace the Navigation Display Module. Refer to Navigation Display Module Replacement in Instrument Panel, Gauges and Console. Is the replacement complete? | -- | Go to Navigation System Check | -- |
26 | Repair the open in circuit 450 between cavity 1 of the Navigation Display Module connector C1 and Ground G201. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
27 | Replace the Navigation Relay. Is the replacement complete? | -- | Go to Navigation System Check | -- |
28 | Repair the open in circuit 334 between cavity A7 of the Navigation Relay and cavity 23 of the Navigation Display Module connector C3. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Navigation System Check | -- |
