Removal Procedure
- Remove the instrument panel upper trim
panel. Refer to
Instrument Panel Upper Trim Pad Replacement
in Instrument Panel,
Gages and Console.
- Disconnect the electrical connector from the speaker being serviced.
- Remove the fasteners from the speaker being serviced.
- Remove the speaker from the IP upper pad.
Installation Procedure
- Align the speaker being replaced with
the opening in the instrument panel upper trim panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the speaker fasteners.
Tighten
Tighten the fasteners to 1.8N·m (16 lb in).
- Connect the speaker electrical connector.
- Install the instrument panel upper trim panel. Refer to
Instrument Panel Upper Trim Pad Replacement
in Instrument Panel, Gages and Console.