Were you sent here from the Hydraulic Brake Symptom table?

Go to Step 2

Go to Diagnostic Starting Point - Hydraulic Brakes

Inspect for proper brake pedal travel. Refer to Brake Pedal Travel Measurement and Inspection .

Is the brake pedal travel distance within the acceptable limits?

Go to Step 5

Go to Step 3

1. Inspect for worn, missing, misaligned, bent or damaged brake pedal system components.

•	For the brake pedal pushrod component inspection, refer to Brake Pedal Pushrod Inspection .

•	Inspect the brake pedal bushings for excessive wear and/or damage and inspect the brake pedal for a bent and/or damaged condition.

2. Replace the brake pedal system components that are worn, missing, misaligned, bent or damaged, refer to the following procedure(s) as necessary.

•	Brake Pedal Assembly Replacement

•	Power Vacuum Brake Booster Replacement - LH drive - for pedal pushrod replacement

•	Power Brake Booster Replacement - RH drive - for pedal pushrod replacement

Did you find and replace any worn, missing, misaligned, bent or damaged brake pedal system components?

Go to Step 4

Go to Step 5

Reinspect for proper brake pedal travel. Refer to Brake Pedal Travel Measurement and Inspection .

Is the brake pedal travel distance within the acceptable limits?

Go to Step 8

Go to Step 5

Inspect the hydraulic brake system for proper operation. Refer to Hydraulic Brake System Diagnosis .

Did you find and correct a condition?

Go to Step 8

Go to Step 6

Inspect the disc brake system for proper operation. Refer to Disc Brake System Diagnosis .

Did you find and correct a condition?

Go to Step 8

Go to Step 7

Inspect the brake assist system for proper operation. Refer to Brake Assist System Diagnosis .

Did you find and correct a condition?

Go to Step 8

Go to Diagnostic Starting Point - Hydraulic Brakes

Road test the vehicle to confirm proper operation. Refer to Brake System Vehicle Road Test .

Is the condition still present?

Go to Step 2

System OK