GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front fascia lower close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .
  2. Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.

  3. Object Number: 918899  Size: SH

    Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:

       • Turn off the lamp switch and allow the bulb to cool before changing the bulb.
       • Leave the lamp switch OFF until the bulb change is complete.
       • Always wear eye protection when changing a halogen bulb.
       • Handle the bulb only by its base. Avoid touching the glass.
       • Keep dirt and moisture off the bulb.
       • Properly dispose of the used bulb.
       • Keep halogen bulbs out of the reach of children.

  4. Remove the fog lamp bulb/socket from the fog lamp by rotating the bulb/socket counterclockwise (1).

  5. Object Number: 922582  Size: SH
  6. Remove the fog lamp bulb/socket (1).

Installation Procedure


    Object Number: 922582  Size: SH
  1. Install the bulb/socket (1) to the fog lamp.

  2. Object Number: 918903  Size: SH
  3. Rotate the bulb/socket clockwise (1) until the bulb/socket is fully seated.
  4. Connect the front fog lamp electrical connector to the fog lamp bulb/socket.
  5. Inspect the fog lamp for proper operation.
  6. Install the front fascia lower close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .
  7. Aim the fog lamp. Refer to Fog Lamp Aiming .