GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 XLR 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Driver Seat Cushion Cover Replacement

Removal Procedure
  1. Remove the seat. Refer to Driver or Passenger Seat Replacement.

    2. Object Number: 1276250 Size: SH
  2. Remove the seat belt buckle and pretentioner from the seat frame. Refer to Seat Belt Buckle Pretensioner Replacement.
  3. Remove the driver seat finish panel. Refer to Driver Seat Outer Finish Panel Replacement.
  4. Remove the driver seat rear panel bracket. Refer to Driver Seat Rear Panel Bracket Replacement.

    5. Object Number: 1335205 Size: SH
  5. Remove the retaining clips which secure the cushion cover to the seat frame.
  6. Remove the cover from the seat.

Installation Procedure

    Object Number: 1335205 Size: SH
  1. Position the trim cover over the seat cushion foam.
  2. Install the cover to the seat frame.
  3. Install the attaching retainers from the cover to the seat frame.
  4. Install the rear flap ends together. Engage the hook and the loop.
  5. Install the driver seat rear panel bracket. Refer to Driver Seat Rear Panel Bracket Replacement.
  6. Install the driver seat finish pane. Refer to Driver Seat Outer Finish Panel Replacement.

    7. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1276250 Size: SH
  7. Install the seat belt buckle and the pretentioner to the seat frame and tighten the mounting nut to 40 N·m (29 lb ft).
  8. Install the seat. Refer to Driver or Passenger Seat Replacement.