Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Wiper/Washer operation and perform the necessary inspections? | -- | Go to Step 2 | |
2 |
Does the test lamp illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 |
Does the test lamp illuminate? | -- | Go to Step 5 | Go to Step 6 |
4 | Replace the rear window wiper/washer switch. Refer to Accessory Switch Replacement in Insturment Panel, Gauges and Console. Did you complete the replacement? | -- | Go to Step 11 | -- |
5 | Connect a test lamp between CKT 392 (DK GRN) cavity B to CKT 350 (BLK) cavity A at the rear window washer pump motor connector. Does the test lamp illuminate? | -- | Go to Step 7 | Go to Step 9 |
6 | Repair the open in CKT 392 (DK GRN). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 11 | -- |
7 | Check for a cut in the washer fluid line. Did you find a cut in the washer fluid line? | -- | Go to Step 10 | Go to Step 8 |
8 | Replace the rear washer pump. Refer to Washer Pump Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
9 | Repair the open in CKT 350 (BLK). Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 11 | -- |
10 | Replace the washer fluid line? Refer to Hose Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
