GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Body Side Lower Front Molding Replacement

Removal Procedure
  1. Remove the wheel opening screws. If the vehicle is equipped with assist steps, the cladding will be shorter across the bottom.

    2. Object Number: 321677 Size: SH
  2. Remove the cladding from the rear quarter panel. Refer to Adhesive Retained Cladding Replacement .

Installation Procedure

    Object Number: 321677 Size: SH
  1. Install the cladding to the rear quarter panel. Refer to Adhesive Retained Cladding Replacement .

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the wheel opening screws.

    3. Tighten
    Tighten the wheel opening screws to 2 N·m (18 lb in).