GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Astro - 2WD 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Body Side Lower Rear Molding Replacement

Removal Procedure

    Object Number: 321876 Size: SH
  1. Remove the rear corner extension molding retainers.
  2. Remove the rear corner extension molding.
  3. Remove the cladding screws.
  4. Remove the cladding retainers.
  5. Remove the cladding from the body. Refer to Adhesive Retained Cladding Replacement .

Installation Procedure
  1. Install the cladding to the body. Refer to Adhesive Retained Cladding Replacement .

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the cladding screws.

    3. Tighten
    Tighten the cladding screws to 2 N·m (18 lb in).

  3. Install the cladding retainers.
  4. Install the rear corner extension molding.

    5. Object Number: 321876 Size: SH
  5. Install the rear corner extension molding retainers.