GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Roll the window up completely.
  2. Remove the trim panel. Refer to Door Trim Panel Replacement .
  3. Use a sharp bladed tool, if needed, in order to separate the water deflector at the perforations. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the door to window run channel bolt.

  5. Object Number: 324136  Size: SH
  6. Pull the run channel away from the upper channel (which is part of the door) in order to remove the window run channel from the door.

Installation Procedure


    Object Number: 324136  Size: SH
  1. Slide the clip of the channel into the upper channel in order to install the window run channel to the door.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the door to window run channel bolt.
  4. Tighten
    Tighten the door to window run channel bolt to 9.5 N·m (84 lb in).

  5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  6. Install the trim panel. Refer to Door Trim Panel Replacement .