Did you review the power seats circuit description and perform the necessary inspections?

--

Go to Step 2

Go to Diagnostic Starting Point

1. Disconnect 2-way power seat connector.
2. Connect one lead of DMM to cavity B to the switch side of the 2-way connector
3. Connect the other lead of the DMM to cavities E and D of the power seat switch connector while activating their respective functions with the power seat switch.

Do both functions indicate continuity?

--

Go to Step 4

Go to Step 3

Replace power seat adjuster switch. Refer to Power Seat Switch Replacement

Is the repair complete?

--

Go to Step 7

--

Check the following circuits for continuity:

Are the wires functional?

--

Go to Step 5

Go to Step 6

Replace power seat motor. Refer to Seat Replacement - Power with Adjuster

Is the repair complete?

--

Go to Step 7

--

Repair OPEN/SHORT in one of the following circuits:

Is the repair complete?

--

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2