Important: Set the front wheel alignment to the specifications while the vehicle is in the normally loaded condition. The vehicles that are consistently operated with the heavy loads should have toe-in adjusted with the vehicle under the heavy load. This procedure should result in longer tire life.

The satisfactory vehicle operation may occur over a wide range of front wheel alignment settings. If the settings vary beyond specified tolerances, adjustments are necessary. Refer to Wheel Alignment Specifications .

1. Measure the front alignment angles using the following steps:

1.1.	Install the alignment equipment according to the manufacturer's instructions.

1.2.	Measure the alignment angles.

Record the readings.

1.3.	Make the adjustments that are required in the following order:

•	The caster

•	The camber

•	The toe-in

2. To adjust the caster and camber, refer to Front Caster and Camber Adjustment .
3. To adjust the front toe, refer to Front Toe Adjustment .