Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Exterior Lights System Check? | -- | Go to Step 2 | |
2 |
Do the suspect lamps light? | -- | Go to Step 3 | Go to Hazard Lamps Inoperative |
3 |
Does the test lamp light? | -- | Go to Step 4 | Go to Step 5 |
4 | Connect a fused jumper from CKT 17 (WHT) cavity A to CKT 140 (ORN) cavity B of the Brake Pedal Position switch. Do the stop lamps light? | -- | Go to Step 6 | Go to Step 7 |
5 | Repair the open in CKT 140 (ORN) between the Brake Pedal Position switch and splice S221. Is the repair complete? | -- | -- | |
6 | Replace the Brake Pedal Position switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes. Is the replacement complete? | -- | -- | |
7 | Check for an open in CKT 17 (WHT) between the Brake Pedal Position switch and the turn/hazard switch. Did you find an open? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair the open in CKT 17 (WHT) between the Brake Pedal Position switch and the turn/hazard switch. Is the repair complete? | -- | -- | |
9 | Replace the turn/hazard switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering. Is the replacement complete? | -- | -- |
