Tools Required

J 38778 Door Pad Trim and Garnish Clip Remover.

1. Remove the seat belt upper mount. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Restraints.
2. Remove the retaining screw.



3. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.

1. Install the panel to the vehicle:

1.1.	Align the retaining clips with the holes in the body.

1.2.	Press the panel in order to seat the fasteners into place.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the retaining screw.

Tighten
Tighten the retaining screw to 2 N·m (18 lb in).

3. Install the seat belt upper mount. Refer to Front Seat Shoulder Belt Guide Adjuster Replacement in Restraints.