GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1241979  Size: SH
  1. Remove the crossmember assembly. Refer to Front Suspension Crossmember Replacement .
  2. Remove the stabilizer bar from the crossmember assembly by removing the U-clamp bolts.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1241980  Size: SH
  1. Install the U-clamps and the stabilizer bar to the crossmember.
  2. Tighten
    Tighten the U-clamp bolts to the crossmember assembly to 25 N·m (18 lb ft).

  3. Install the crossmember assembly. Refer to Front Suspension Crossmember Replacement .