Tools Required

J 41232 Return Spring Compressor

1. Remove the two seal rings (403) from the driven sprocket support.
2. Discard the two seal rings (401).



3. Compress the 2nd clutch spring and retainer assembly (405). Use the J 41232 .
4. Remove the 2nd clutch spring retainer snap ring (406).
5. Remove the J 41232 .



6. Remove the 2nd clutch spring and retainer assembly (405).
7. Remove the 2nd clutch piston and seal assembly (404). If not damaged, the piston and seal assembly is reusable.



8. Inspect the piston and seal assembly for damaged seals
9. If the seal is cut or damaged replace the seal with a new piston and seal assembly.



10. Inspect the bushing and bearing for damage or excessive wear.
11. Inspect the driven sprocket support for plugged feed holes, damaged seal grooves, stripped bolt holes, and a damaged machined surface.



12. Inspect the spring assembly for dislocated or damaged springs.
13. Clean and dry each of the components.