Removal Procedure
- From the rear of the dome lamp lens, insert a flat-bladed tool (1) between the dome lamp lens and the headliner (2).
- Use the flat bladed tool in order to push the tab at the rear of the dome lamp lens forward. Disengage the tab from the headliner.
- Pull the dome lamp lens (1) rearward in order to disengage the 2 tabs at the front of the headliner (5).
- Lower the headliner enough to gain access to the dome lamp housing. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Remove the reading lamp switch bezels (2) from the headliner (5).
- Remove the push-buttons (3) from the reading lamp switches (4).
- Remove the reading lamp sockets (1).
- Remove the dome lamp sockets (4).
- Remove the reading lamp switches (2).
- Remove the wire harness (5) from the dome lamp housing (3).
- Remove the dome lamp housing (3) from the headliner.
Installation Procedure
- Install the dome lamp housing (3) to the headliner.
- Install the wire harness (5) to the dome lamp housing (3).
- Install the reading lamp switches (2).
- Install the dome lamp sockets (4).
- Install the reading lamp sockets (1).
- Install the push-buttons (3) to the reading lamp switches (4).
- Install the reading lamp switch bezels (2) to the headliner (5).
- Reinstall the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Insert the 2 forward tabs on the dome lamp lens (1) into the appropriate holes in the headliner (5).
- Push at the rear of the dome lamp lens (1) until the rear tab is fully seated in the headliner (5).