GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2001 🢒 Cavalier 🢒 Body and Accessories 🢒 Doors 🢒 Outside Rearview Mirror Replacement

Removal Procedure

    Object Number: 279014 Size: SH
  1. Remove the upper trim finish panel from the front door. Refer to Upper Extension Trim Panel Replacement .
  2. Remove the rear view mirror sound absorber.
  3. Disconnect the rear view mirror electrical connector (3), if equipped.

    4. Object Number: 279016 Size: SH
  4. Remove the rear view mirror nuts (2).
  5. Remove the rear view mirror (1) from the door.

Installation Procedure

    Object Number: 279016 Size: SH
  1. Position the rear view mirror (1) to the door.

    2. Object Number: 279014 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear view mirror nuts (2).

    3. Tighten
    Tighten the rear door rear view mirror nuts (2) to 6 N·m (53 lb in).

  3. Connect the rear view mirror electrical connector (3), if equipped.
  4. Install the rear view mirror sound absorber.
  5. Install the front door upper trim finish panel. Refer to Upper Extension Trim Panel Replacement .