Removal Procedure
- Remove the headlining trim finish panel. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Disconnect the electrical
connector from the following components:
2.1. | The sunroof control switch (3) |
2.2. | The sunroof express module (2) |
2.3. | The sunroof motor (4) |
2.4. | The body harness (1). |
Important:
• | Note the location of the wiring harness. |
• | Note the location of the tie-straps that secure the harness to
the drive cables and to the sunroof module. |
- Remove the wiring harness from the sunroof.
Installation Procedure
- Install the wiring harness
to the sunroof.
- Connect the electrical connector to the following components:
2.1. | The body harness (1) |
2.2. | The sunroof control switch (3) |
2.3. | The sunroof express module (2) |
2.4. | The sunroof motor (4) |
- Install the headlining trim finish panel. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Inspect the sunroof for proper operation.