Tools Required

J 29843-9 Door Lock Striker and Seat Belt Torx Wrench

1. Remove both rear door striker brackets. Refer to Striker Tie Bar Bracket Replacement - Rear Door .
2. Remove the backing plate nuts.
3. Remove the rear seat backing plate.

1. Install the rear seat backing plate.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the backing plate nuts.

Tighten
Tighten the backing plate nuts to 12 N·m (106 lb in).

3. Install the rear door striker brackets. Refer to Striker Tie Bar Bracket Replacement - Rear Door .