GM Service Manual Online
For 1990-2009 cars only

Step

Action

Yes

No

DEFINITION: Driver is unable to maintain consistent, predictable vehicle driving control in any direction.

1

Did you review the General Description and perform the necessary inspections?

Go to Step 2

Go to Symptoms - Suspension General Diagnosis

2

Verify that the directional stability is poor.

Does the system operate normally?

System OK

Go to Step 3

3

  1. Inspect the stabilizer shaft, links, and insulators for wear or damage.
  2. Replace as necessary. Refer to Stabilizer Shaft Replacement in Front Suspension.

Does the vehicle still exhibit poor directional stability?

Go to Step 4

System OK

4

  1. Inspect the king pins and tie rods for wear or damage.
  2. Repair as necessary.
  3. • Refer to Steering Linkage Outer Tie Rod Replacement in Steering Linkage.
    • Refer to Steering Linkage Inner Tie Rod Replacement in Steering Linkage.
    • Refer to Steering Knuckle and King Pin Replacement in Front Suspension.

Does the vehicle still exhibit poor directional stability?

Go to Step 5

System OK

5

Inspect the wheel bearings/hubs for looseness or excessive lateral runout. Refer to Wheel Bearings Diagnosis .

Does the vehicle still exhibit poor directional stability?

Go to Step 6

System OK

6

  1. Inspect the vehicle trim height. Refer to Trim Height Inspection .
  2. Repair as necessary.

Does the vehicle still exhibit poor directional stability?

Go to Step 7

System OK

7

Inspect and adjust the wheel alignment as necessary. Refer to Wheel Alignment Measurement in Wheel Alignment.

Does the vehicle still exhibit poor directional stability?

Go to Step 8

System OK

8

  1. Inspect the steering gear and steering column for looseness. Refer to Looseness in Steering Column in Steering Wheel and Column-Standard or Looseness in Steering Column in Steering Wheel and Column-Tilt.
  2. Repair as necessary.

Did you complete the repair?

Go to Step 9

System OK

9

  1. Inspect the steering gear mounting bolts for looseness. Refer to Fastener Tightening Specifications in Power Steering.
  2. Inspect the over-center adjustment. Refer to Steering Gear Pitman Shaft Over-Center Preload Adjustment - Off Vehicle in Power Steering.
  3. Repair as necessary.

Did you complete the repair?

Go to Step 10

--

10

Operate the vehicle in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3