GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy C Cab/Chassis HD (GMT 400) 🢒 Body 🢒 Interior Trim 🢒 Rear Quarter Trim Panel Replacement

Removal Procedure
  1. Remove the coat hook. Refer to Coat Hook Replacement .
  2. Remove the seat belt. Refer to Front Seat Belt Replacement in Seat Belts.
  3. Remove the jack cover, the jack, and the jack tray on the right side.
  4. Remove the rear window lower garnish molding. Refer to Rear Window Lower Garnish Molding Replacement .

    5. Object Number: 276484 Size: SH
  5. Remove the quarter panel trim screws.
  6. Remove the rear screws from the sill trim plate.
  7. Remove the quarter trim panel.

Installation Procedure

    Object Number: 276484 Size: SH
  1. Install the quarter trim panel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the panel screws.

    3. Tighten
    Tighten the quarter panel trim screws to 2 N·m (18 lb in).

  3. Install the rear screws into the sill trim plate.
  4. Install the rear window lower garnish molding. Rear Window Lower Garnish Molding Replacement .
  5. Install the jack tray, the jack, and the cover on the right side.
  6. Install the seat belt. Refer to Front Seat Belt Replacement in Seat Belts.
  7. Install the coat hook. Refer to Rear Window Lower Garnish Molding Replacement .