Door Window Regulator Replacement Manual

1. Raise and support the window glass.
2. Remove the trim panel. Refer to Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Door Water Deflector Replacement .
4. Disconnect the harness from the electric window motor assembly.
5. Remove the 2 bolts holding the glass to the regulator.



6. Remove the bolts from the window regulator.
7. Remove the window regulator assembly from the door folding both sides together.

1. Install the regulator to the door.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts to the window regulator.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

3. Align the window glass to the regulator and install the bolts holding the glass to the regulator.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

4. Connect the harness to the electric window motor assembly.
5. Install the water deflector. Refer to Door Water Deflector Replacement .
6. Install the trim panel. Refer to Door Trim Panel Replacement .
7. Lower the window. Inspect the operation.