GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the window.
  2. Remove the trim panel. Refer to Door Trim Panel Replacement .
  3. Remove the water deflector. Refer to Door Water Deflector Replacement .
  4. Disconnect the wiring harness from the window motor assembly.
  5. Remove the 2 bolts holding the window to the regulator.

  6. Object Number: 348453  Size: SH
  7. Remove the bolts from the window regulator.
  8. Remove the window regulator assembly from the door folding both sides together.
  9. Remove the window regulator motor. Refer to Front Side Door Window Regulator Motor Replacement .

Installation Procedure


    Object Number: 348453  Size: SH
  1. Install the window regulator motor. Refer to Front Side Door Window Regulator Motor Replacement .
  2. Install the regulator to the door.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the bolts to the window regulator.
  5. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  6. Align the window to the regulator and install the bolts holding the window to the regulator.
  7. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  8. Connect the wiring harness to the window motor assembly.
  9. Install the water deflector. Refer to Door Water Deflector Replacement .
  10. Install the trim panel. Refer to Door Trim Panel Replacement .
  11. Lower the window. Inspect the window operation.