Tools Required

J 42851 Front Cover Oil Seal Installer

1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .

Important: Use care as not to damage the engine front cover or the crankshaft sealing area when removing the crankshaft front cover oil seal.

2. Remove the crankshaft front cover oil seal.

1. Lubricate the sealing surface of the crankshaft front oil seal with clean engine oil.
2. Position the NEW crankshaft front oil seal in the engine front cover so that the dimple (1) on the rear of the seal is in the 12 o'clock position.
3. Using J 42851 install the oil seal.
4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .