GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Chevy K Silverado - 4WD 🢒 Preface 🢒 Cautions and Notices 🢒 Voltmeter Gage Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1694856 Size: SH
  1. Disconnect the battery cables. Refer to Battery Cable Disconnect and Connection in Engine Electrical.
  2. Remove the accessory panel. Refer to Accessory Instrument Panel (I/P) Replacement .
  3. Remove the nuts (4) from the back of the voltmeter.
  4. Remove the voltmeter gage bracket (3) and remove the voltmeter (1) from the panel.

Installation Procedure

    Object Number: 1694856 Size: SH
  1. Install the voltmeter (1) into the panel opening.
  2. Install the bracket (3) on the back of the voltmeter.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts (4) on the voltmeter gage studs.

    4. Tighten
    Tighten nuts to 2.8 N·m (24 lb in).

  4. Install the accessory panel. Refer to Accessory Instrument Panel (I/P) Replacement .
  5. Connect the battery cables. Refer to Battery Cable Disconnect and Connection in Engine Electrical.